Hot air sterilization device

Hot air sterilizer - CH 650 T Technical data: 220 V / 50 Hz Power consumption 300 watts It is well known that high temperatures kill bacteria and viruses. This device can be operated at a temperature of up to 200 degrees Celsius. Devices like this are used in laboratories, medical practices, clinics, but above all in foot care or nail salons, tattoo studios and piercing studios. Operating instructions: The supplied cable should first be attached to the CH 360 T hot air sterilizer and then plugged into the socket. The instruments to be sterilized should be placed on the supplied tablet and placed in the hot air sterilizer and close the lid. Now the timer is set according to your wishes. Then the device is switched on. The red indicator light shows what the device is in working mode. Now you can set the temperature controller to the desired working temperature, which activates the green control lamp. Both indicator lights turn off when the sterilization process is complete. If only the temperature controller is operated, the indicator lights do not come on. The general time is 15 minutes at 125 degrees Celsius. Adjust the temperature with the right button. After use, the plug should be removed from the socket. Safety note: The device should not get into the hands of children. After the sterilization process, take the rings included in the delivery and place them on the handle of the insert tray. This way, the bowl can be safely removed from the hot air sterilizer. NEVER TOUCH THE HOT INSERT TRAY BY HAND!